Sales Email: david@kefidinc.comZhengzhou Kefid Machinery Co., Ltd.
High pressure suspension grinding mill got national patent and CE certificate, that with the features of high efficiency and energy saving. It is suitable for grind mineral to powder, which is widely used in the fields of metallurgy, building materials, chemical and mining industy and so on. The final product powder can reach 0.613mm (30mesh) to 0.033mm(425mesh). High Pressure Suspension Mill can be used to grind non-inflammable and non-explosive materials with Moth's hardness below 9.3 and moisture content below 6%, such as barite, limestone, pottery, and scoria. Size of final products can be adjusted between 80-425 mesh. High Pressure Suspension Mill can produce coarse powder between 30-80 mesh by adding special equipment.
High Pressure Suspension mill is mainly made up of the mainframe, separator, blower, finished powder cyclone collector, bag filter and connecting pipes, etc.
1. Unique design. Compared with other grinding mills, its capacity increases by 10%-20% under the same power condition, and compression force of rollers to material improve 800-1200kgf under the force of high-pressure spring.
2. Size of final product can be 0.613mm (30mesh) –0.033mm (425mesh). And a few of material powder can reach 0.013mm (1000 mesh).
3. The dust-removing effect can fully conform to the national standard.
4. The separator can be adjusted very easily.
5. The change period of roller and ring is long.
6. The grinding equipments adopt lapping multilevel seal, which is very effective.
| Model | Piece of roller | Size of the roller (mm) | Size of the ring (mm) | Feed size(mm) | Fineness of powder (mm) | Capacity (t/h) | Motor power (kW) | Weight (without motor)(t) |
| YGM65 | 3 | Φ210×150 | Φ650×150 | ≤15 | 0.033-0.613 | 0.4-1.8 | 15 | 3.6 |
| YGM75 | 3 | Φ260×150 | Φ780×150 | ≤15 | 0.033-0.613 | 1-3 | 18.5 | 4.8 |
| YGM85 | 3 | Φ270×150 | Φ830×150 | ≤20 | 0.033-0.613 | 1.2-4 | 22 | 8 |
| YGM95 | 4 | Φ310×170 | Φ950×170 | ≤25 | 0.033-0.613 | 2.1-5.6 | 37 | 14 |
| YGM130 | 5 | Φ410×210 | Φ1280×210 | ≤30 | 0.033-0.613 | 2.5-9.5 | 75 | 24 |
When entering grinding chamber, the raw materials are shoveled up by the shovels and grinded between the rollers and ring; the materials after grinding are brought into the separator along with the air from the blower, and the qualified fine powder became final products and come into the cyclone powder collector, the other unqualified powder fall down to be re-grinded. The circular air returns back to the blower that the above process will be repeated, and the remaining air enters the bag filter in order to protect the environment.
If you want to get more information about High Pressure Suspension Grinding Mill, Phone to Kefid Machinery Company, we are expecting for you.